Technical Specification

  • Working Range : 0.100 To 4.00mm
  • HF Ultrasonic Power : 200watts.
  • Electrical Supply : AC 220v/50bz. (Single Phase)
  • 4. Frequency Range : 22 +/-5khz.
  • 5. Tuning : Automatic Tuning.
  • Needle Grinder With Diamond Wheel.
  • Die Turntable Speed 100 rpm.
  • Oscillating Die Table
  • Die Table : Spring Loaded.
  • Die Casing Size-dia 28 x 12 / 43 x 27mm.
  • Works Needle Size 2, 3, 4, 5, 6, 8mm.
  • Needle Grinding Device Inbuilt. (0-601at 3000 rpm.)
  • Timer Setting : 1sec. To 60 min.
  • Head Up and Down 100 mm.
  • Hole Surface Roughness . 0.025p.
  • Dimension In mm L 600 x W 600 x H 800.
  • Nat Weight : 190kgs. Approx.
  • Machine Supplied In Wooden Box.
  • Consumables Required :
    • Diamond Powder
    • Steel Needles

Shaping & Polishing Time

Size Range

Shaping time (in minutes)

Polishing time(in minutes)

0.1-0.2 7-10 20-30
0.2-0.5 10-15 30-40
0.5-2.00 15-20 35-45
2.01- 3.00 20-30 95- 50
3.01 - 4.00 30 - 40 60 - 80

Features

  • Accurate Pin Angle Using Pin Grinder.
  • Very Fast Re-sizing Time; For Blank No D-6 Only 5 Minutes.
  • Horn With Pin Rotates Clockwise (rpm 100).
  • No Unbalanced Bearing Length.
  • Changeable Pressure Controlled By Magnetic Enables to Work On PCD & Diamond Dies Of Fine, Medium, Thick sizes.
  • Exact Centering Is Possible By Adjustment X. Y. Axis.
  • Angle Of Dies Holder Is Convertible During Grinding Process.
  • Automatic Tuning System.
  • Simple Operation By Even Beginners.
  • Oscillation Helps in Removing Sharp Edges.
  • Ultrasonic Generators Is Adjustable Up lb 0 4.00mm.
  • Increased High Productivity Saving Operation Time.
  • Uniformly Ultrasonic Power.
  • Compact Size.