Lubricants for Ferrous Wire Drawing

Technolubre FM/194

Aspect Water Solubility Additives Fat Acid Content Grain Size Melting Point
Granular Beige Insoluble Adhsivant Low Medium Softens Over 180°C
Calcium Base Fluidizer      
  EP -A.W      
Application It is used to draw low carbon wires ata average reduction of 24-29% for draft at speed 7 to is m/sec recommended where large thickness 07 lubricating film is require.
Application Example Nails, mesh. Annealed. Co2 wire and pc wire
Packing Bags Of 25 Kgs

Sintek FL/22SF

Aspect Water Solubility Additives Fat Acid Content Grain Size Melting Point
Amber Liquid Emulsifiable Detergent High Not Applicable Not Applicable
    E.P - A.W    
Application It Is Used For Wet Drawing Op Low And Carbon Wires At Average Reduction Of 10-24% It Is Prepared In Water Solutions With Concentrations Of 2-4% (Tap Water Can Be Used)
Application Example For bright low and medium carbon wires. Co2 staples and glavinisbd wire
Packing Drums Of 200ltrs And 1000 Ltrs

Tecnolubre FM /198 LB

Aspect Water Solubility Additives Fat Acid Content Grain Size Melting Point
Granular Beige Insoluble Adhsivant Medium Medium Softens Over 180°C
Calcium Base Fluidizer      
  EP -A.W      
  Detergent      
Application

It is used to draw low and high carbon wires at an average reduction oh 19-35% for draft
At a speed of 7 to 15 m/sec

Application Example Nails, Mesh, Annealed, Co2 Wire And Pc Wire
Packing Bags Of 25 Kgs

Tecnolubre FM/ 430

Aspect Water Solubility Additives Fat Acid Content Grain Size Melting Point
Granular Beige Partially soluble Detergent Medium Fine Softens Over 200‘C
Cal / Sodium Base Fluidizer      
Application

It is used to dry drawing of Low carbon wires on all the steps and is recomnded in the drawing operations where is necessary to have a good lubricant cover, but easily removable in the following treatments.

Application Example Low carbon wires for electrode
Packing Bags of 25 Kgs

Tecnolubre FM / 501

Aspect Water Solubility Additives Fat Acid Content Grain Size Melting Point
Granular Beige Partially Soluble Adhesivant Medium Medium Softens Over 180-200C
Cal / Sodium Base Fluidizer High    
    EP -A.W    
    Detergent    
Application

It Is Used To Draw High Carbon Wires Or Stainless Steel At Average Reduction Of 19 27% For Draft At A Speed Of 7 To 12 M/Sec The Product Is Recommended Where It Is Necessary To Obtain A Large Thickness Of Lubricating Film

Application Example Spring wire and p.c. Wire
Packing Bags of 25 Kgs

Tecnolubre FM/ 807 BN

Aspect Water Solubility Additives Fat Acid Content Grain Size Melting Point
Granular Beige Soluble   Adhesivant High Fine Softens Over 260C
Softens Base   Fluidizer    
    Detergent    
Application It Is Used To Draw High Carbon Wires At Average Reduction Of 20-25% For Draft At A Speed Of 7 To 15 M/Sec This Product Is Recommended Where Light Thickness Of Lubricating Film Is Recommended
Application Example Nails. Mbsh. Co/mig wire, spring wire and pc wire
Packing Bags of 25 Kgs