Wooden Polishing Pins

Ajex polishing pins arc precisely made from highly compressed wood layers with alternating grain direction then saturated and bonded with resin. These pins provide a high polish and retain their shape during polishing operations.

Sizes Available (D) Angle Available
6, 9& 12 mm Bigger Size on Request 10°, 12°, 14° & 16°

Steel Polishing Pins

They are available in blank or ground form. Both are precisely made from AISI Cl0-60 Steel and through hardened for long life. The blank pins rough ground to plus or minus 1 degree and are ready to use. Our grounded pins are precision ground to with in 1/8* of a degree.

Sizes Available (D) Angle Available
6, 9 & 12 mm Bigger Size on Request 10°, 12°, 14° & 16°

Steel Lapping Pin

It is precisely made from D-2 tool steel. Lapping pin is an accurate, economical method for sizing and polishing draw die bearings. We have lapping pin in 0.005 mm increments. From sizes 0.5-20.00 mm readily available. Other sizes available upon request.

Sizes in Inches Tolerrance in mm
0.050 to 1.200

0.005

1.25 to 2.500

0.005-0.10

2.5 to 3.800

0.010

3.8 to 5.080

0.010

5.10 to 6.3

0.010

6.3 to 7.600

0.010

7.6 to 8.800

0.010

8.81 to 9.5

0.010