A-53, G. T. KARNAL ROAD,
AZADPUR, DELHI - 110033 (INDIA)
Ajex polishing pins arc precisely made from highly compressed wood layers with alternating grain direction then saturated and bonded with resin. These pins provide a high polish and retain their shape during polishing operations.
| Sizes Available (D) | Angle Available |
|---|---|
| 6, 9 & 12 mm Bigger Size on Request | 10°, 12°, 14° & 16° |
They are available in blank or ground form. Both are precisely made from AISI Cl0-60 Steel and through hardened for long life. The blank pins rough ground to plus or minus 1 degree and are ready to use. Our grounded pins are precision ground to with in 1/8* of a degree.
| Sizes Available (D) | Angle Available |
|---|---|
| 6, 9 & 12 mm Bigger Size on Request | 10°, 12°, 14° & 16° |
It is precisely made from D-2 tool steel. Lapping pin is an accurate, economical method for sizing and polishing draw die bearings. We have lapping pin in 0.005 mm increments. From sizes 0.5-20.00 mm readily available. Other sizes available upon request.
| Sizes in Inches | Tolerrance in mm |
|---|---|
| 0.050 to 1.200 | 0.005 |
| 1.25 to 2.500 | 0.005-0.10 |
| 2.5 to 3.800 | 0.010 |
| 3.8 to 5.080 | 0.010 |
| 5.10 to 6.3 | 0.010 |
| 6.3 to 7.600 | 0.010 |
| 7.6 to 8.800 | 0.010 |
| 8.81 to 9.5 | 0.010 |
SUCCESSFUL SHOW AT WIRE SOUTHEAST ASIA HELD IN BANGKOK
SUCCESSFUL SHOW AT WIRE SOUTHEAST ASIA HELD IN Mumbai Exhibitions 2018
